超精密气体静压系统节流器法向随机微振动研究

以无气腔平面节流器为研究对象,对节流器流固耦合法向随机微振动进行了理论仿真和实验研究。受限于节流器厚度与气膜厚度尺寸的差异和输入初始边界条件,建立了节流器的COMSOL仿真简化模型,对节流器-气膜微流场进行双向流固耦合数值模拟。仿真结果表明,节流器的法向随机微振动幅值关于节流器中心对称,且由中心向边缘逐渐增大;微振动幅值随气体入口流速的增大而增大。实验采用纳米级激光测振仪,依次测量供气压力为0.1,0.2,…,0.5 MPa时尺寸为75 mm×50 mm×14 mm的HEXAGON双环联结型节流器多个不同位置的法向振动,实验结果表明,法向随机微振动幅值分布特性与仿真结果一致,关于节流器中心对称,且由中心向边缘逐渐增大,验证了节流器法向微振动的"跷跷板"振动形式;在0.5 MPa供气压力下,边缘振动幅值超过1 nm。对实验数据进行功率谱密度分析,结果表明不同供气压力下法向随机微振动均在9.4 kHz和10.6 kHz处产生较大功率,可认为与节流器-气膜流固耦合系统的固有频率有关。研究结果有效地揭示了节流器法向随机微振动的特性,为气体静压系统避开随机共振区、优化气体静压系统的设计提供了理论指导。     

Co-creation of value and the project context: Towards application on the case of Hinkley Point C Nuclear Power Station

The research analyses decisions as evaluative outcomes regarding project value. The UK-French Hinkley Point C Nuclear Power Station provides the case study. Value is traditionally assessed as inputs and outputs. Here, value is conceptualized as a co-created value proposition at the front-end with implications for realization post-completion. Service-dominant logic (SDL) provides the theoretical lens and contributes to a methodological approach for examining projects. Decision-making outcomes provide the evidence from a range of data sources, including reports and commentaries. The methods are interpretative. The findings show that decision-making extends beyond the time-cost-quality/scope dimensions. The long-term issues regarding value realized are often overlooked. Stakeholders and individual actors have mainly focused upon managing political and financial risks, especially time and cost. The research poses challenges to project management analysis, SDL and research design in assessing evidence. Addressing these issues facilitates a knowledge contribution to SDL theorization and the field of project management.     

Ex post demand information sharing between differentiated suppliers and a common retailer

We consider ex post demand information sharing in a two-echelon supply chain in which two suppliers sell differentiated products through a common retailer. We model three scenarios of information sharing to characterise the conditions under which information sharing may benefit or hurt different players: (1) no supplier is informed; (2) only one supplier is informed; and (3) both suppliers are informed. We find that the retailer may voluntarily share the low demand information when the product differentiation and demand magnitude satisfy certain conditions. In contrast, the retailer has no incentive to share the high demand information, even though this information benefits the suppliers. To achieve information sharing, we propose a side payment mechanism, which allows benefitted players to subsidise hurtful players. Finally, we extend our model by considering a situation where the suppliers have limited capacity and may invest to ramp up production capacity to satisfy a high demand.     

An expectation operator for belief functions in the Dempster–Shafer theory*

ABSTRACT

The main contribution of this paper is a new definition of expected value of belief functions in the Dempster–Shafer (D–S) theory of evidence. Our definition shares many of the properties of the expectation operator in probability theory. Also, for Bayesian belief functions, our definition provides the same expected value as the probabilistic expectation operator. A traditional method of computing expected of real-valued functions is to first transform a D–S belief function to a corresponding probability mass function, and then use the expectation operator for probability mass functions. Transforming a belief function to a probability function involves loss of information. Our expectation operator works directly with D–S belief functions. Another definition is using Choquet integration, which assumes belief functions are credal sets, i.e. convex sets of probability mass functions. Credal sets semantics are incompatible with Dempster's combination rule, the center-piece of the D–S theory. In general, our definition provides different expected values than, e.g. if we use probabilistic expectation using the pignistic transform or the plausibility transform of a belief function. Using our definition of expectation, we provide new definitions of variance, covariance, correlation, and other higher moments and describe their properties.     

会计信息质量的非线性模型对公司价值的影响

从时代性、行业性及人力资源价值等方面分析了非线性因素对会计信息质量的影响,认为高质量的会计信息应该反映公司价值,并尝试建立了一个非线性模型,据此大体测算公司价值。     

浅谈高压中速磨粉系统在磷酸二铵生产中的应用

通过对磷酸二铵生产造粒特性分析,高压中速磨粉机原理分析,结合实践生产中的工艺需求,利用高压中速磨粉系统将颗粒状不合格品磨成细粉后添加进系统重新喷浆造粒,提高返料添加量,减少不合格品的产生,腾空仓库有限货位,以获取更大的经济价值。     

Mapping gender and marital roles on customer delight by value perception for mobile technology in India

The Indian telephony industry is a diverse platform for product and service in customer value perception. The present study organizes and synthesizes the varied research streams for developing a customer value delight (CVD) framework for marketing decisions like segmentation and targeting. The conceptual framework is developed by using ten-value predictor variables and customer delight through divergent viewpoints identified from previous studies. The significance of the segregation proposition is tested through discriminant analysis in three different dimension runs i.e. delight, gender, and marital category. The scholarship behind the study provides insight into an imperative issue of segregating customer delight by perceived value predictors in categories. The perceptual mapping and vector magnitude analysis of value predictors were performed to club customers in two categories of Mid-Town (low/moderate delight) and Extremes (high delight). The analysis rigorously supports the discriminating power of perceived price, perceived benefit, and self-congruity. The salience of study unlocks psychographic and demographic perceptual maps of customer delight with its perceived value predictors for strategic and tactful planning in the mobile industry.     

细粒尾矿综合利用技术研究

姑山矿业公司为提高细粒尾矿的综合利用率，研究分析了细粒尾矿的性质，系统研究了尾矿含量、煅烧工艺制度对不同成分体系尾矿陶粒堆积密度、表观密度、空隙率、吸水率、筒压强度及软化系数的影响。研究得出了全尾矿陶粒、细粒尾矿+污泥陶粒、细粒尾矿+污泥+粉煤灰陶粒3种成分体系的尾矿陶粒较优的尾矿含量及煅烧工艺制度，且3种尾矿陶粒均可代替石头用作粗集料。     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.